通用banner
Your current location : Home >> News >> Technical Information

Heating principle of pipeline heater

2021-03-02 11:35:15
second

Pipeline heater is a kind of energy saving equipment for pre-heating material. It is installed before material equipment to realize direct heating of material and make it circulate in high temperature to achieve the purpose of energy saving. It is widely used in the pre-heating of heavy oil, asphalt, clear oil and other fuel oil.


The pipeline heater is divided into two modes: one is to use the flanged tubular electric heating element inside the pipeline heater to insert the heat conduction oil in the reaction kettle jacket of the pipeline heater to heat the heat energy in the pipeline heater to the chemical raw materials in the reaction kettle inside the pipeline heater. Another method is to directly insert the tubular electric heating element in the reactor of the pipe heater or evenly distribute the electric heating pipe around the wall of the pipe heater. This mode is called the internal heat of the pipe heater. The internal heat of the pipeline heater is fast and efficient.


Another mode of pipe heaters is the far infrared electric heating device. That is, the electric heater in the internal system of the pipeline heater wraps the bottom of the reactor in the pipeline heater and the middle and lower parts of the pipeline heater for heating. Far infrared electric heating pipe heater device has big pipe heater heating area of the internal system, pipe heater heats up smooth and fast, uniform pipe heater heat release, pipe heater temperature control is convenient, can be up, middle and down section pipe heater control, pipe reactor in the reactor wall heater temperature control, pipe heater within the kettle on fuel without any side effects, not out of the pipe heater in material carbonization phenomenon now, no noise, the operation of pipe heater pipe heater of long life (30000 hours), pipe heater energy-saving significantly (28%).


The pipeline heater is a new generation of reactor heater in the internal system of the pipeline heater. The pipeline heater uses electric heating method combined with far-infrared technology to evenly distribute heat into the reactor of the pipeline heater. Compared with the original heat conduction oil and steam heating, the pipeline heater can save more than 30% of the production cost. The temperature control system of the pipe heater adopts the silicon controlled in the pipe heater as the main component and a computer interface. The pipe heater uses the computer to analyze and control the temperature difference, so that the operator of the pipe heater can be more relaxed. The far infrared in the pipe heater can promote blood circulation, which is beneficial and harmless to human body. Under the environment of energy saving and emission reduction and protecting the environment, the development prospect of pipeline heater is also expanding. Many large chemical units at home and abroad are replacing thermal oil and steam heating with far infrared heating accordingly.

Label

Recent:

Related products

Related news

Copyright © SINTON ELECTRIC CO.,LTD. CARTRIDGE HEATER IMMERSIO Technical Support:Xiangyun Platform Yancheng Company