通用banner
Your current location : Home >> News >> Technical Information

cartridge heater

2021-10-30 14:55:22
second

Characteristics

1. Nimi diameter , diameter range 3mm to 50mm as design

2. Length can be made as design, length range 20mm to 2000mm as design

3. High wattage density, it is double wattage than standard tubular heating elments. Max wattage density can be made to be 20 to 60W per square cm

4. Simple structure,high heat efficiency,safe and stable,easy to install, long time usage, green product,low price

5. Easy to be made tobe many shapes as usage requirement.

 

Physical & electrical characteristics

1. Fast temperature rising time

2. Small wattage tolerance,when the rated wattage is less than 100W, wattage tolerance should be under ±10%;when the rated wattage is high than 100W, wattage tolerance should be under +5%-10% or 10W  

3. Leakage current is less than 0.5mA when it is cold, and when it is working, the max leakage currect is less than 5mA

4. Insulated resistance

The insulated resistance is higher than 50MΩ at the factory, and the insulated resistance should be higher than 20MΩ after long time store

5.  ability to withstand power on and off,sinton cartridge heater element shall be able to undergo 2000 on-off tests under the specified test conditions without damage

6. overload capacity,Under the specified test conditions and input power, the element shall withstand 30 cycles of overload test without damage

7. heat resistance, Electric cartridge heater element shall withstand 1000 cycles of heat resistance test without damage under the specified test conditions and test voltage

cartridge  heater.jpg

cartridge  heater.jpg

cartridge  heater.jpg

cartridge  heater.jpg



Label

Last:Polyimide film heating elements2021-10-29 14:55:19
Next:oil circulation heater2021-11-04 17:15:45

Recent:

Related products

Related news

Copyright © SINTON ELECTRIC CO.,LTD. CARTRIDGE HEATER IMMERSIO Technical Support:Xiangyun Platform Yancheng Company苏ICP备09051867号-1