Contact Us

Official Web

  • Straight tubular heating element

    Date:2015-9-29

    tubular heater with elbow is cylindrical electrical heating elements. Protected with a stainless steel sheath, their watt density can reach 25 W/cm2 and their operating temperature can go up to 800掳C (1472掳F) Continue reading →

  • Brass machine mica band heater

    Date:2015-9-28

    vProfessional manufacturing brass machine mica band heater are available in a variety of designs and styles suitable for different applications. Our cast-in band heaters are available with cooling tubes for heating and cooling barrels of plastic processing extruders. Continue reading →

  • Immersion heaters

    Date:2017-10-6

    Delta Immersion flanged heaters consist of hairpin bent tubular elements welded or brazed into a flange. Flange heaters are installed by bolting to a matching flange welded to the tank wall or nozzle. Screw plug immersion heaters consist of hairpin bent tubular elements brazed or welded into a screw plug and can be provided with wiring boxes for electrical connections. Screw plug immersion heaters are screwed directly through a threaded opening in a tank wall or through matching pipe coupling; half coupling. Screw plug immersion Continue reading →

  • Cartridge heaters

    Date:2015-9-27

    Delta high-watt density cartridge heaters are fully swaged and can be applied wherever high temperature cartridge heaters are used. High-watt density cartridge heaters will deliver temperatures of 1,200 degrees Fahrenheit on the high-temperature alloy sheath. High quality nickel-chromium resistance wire used throughout assures reliable performance at elevated temperatures. Nickel pins or leads are swaged into the ceramic end cap, at the lead end of the cartridge. Standard 10锟斤拷?nickel, 450-degree Celsius fiberglass-insulated leads with insulation rated at 300 or 600 volts are supplied, optional lead types are available. High-purity magnesium oxide cores and filler materials swaged to rock-hard condition provide superb dielectric strength, while conducting maximum heat from the nickel chrome resistance coil. Metric and inch based dimensions are available. Continue reading →

  • Ceramic Band Heaters

    Date:2015-9-27

    The use of ceramic inserts to support high-temperature nickel-chrome resistance wire allows the Delta ceramic heater band to operate at temperatures reaching 1,500 degrees Fahrenheit. Corrosion-resistant metal is slit along the edges to allow easy fitting of the shroud to the object to be heated. The radiant heating effect of ceramic heaters allows construction in widths greater than those in other types of heaters. Wider bands allow fewer heaters per zone and more uniform heat patterns. Continue reading →

  • K type sheathed thermocouple sensor core

    Date:2015/9/26

    Continue reading →

  • Thermocouple terminal block

    Date:2015/9/26

    Return Blocks that have both terminations on the same side of the terminal block allowing the rail to be mounted next to the wall of an enclosure PlugIn Style Blocks that allow the insertion of removable plugs into control circuits. Available plugs include a Disconnect Plug, a Fuse Plug, and a ComponentPlug which will accommodate various electrical components Continue reading →

  • MI Barrel and Nozzle

    Date:2015/9/1

    The MI Band is a high performance heater. Its performance and name are derived from Watlow's exclusive mineral insulation - a material that has much higher thermal conductivity than the mica and hard ceramic insulators used in conventional heaters. A thin layer of the "high" thermal conductive MI material is used to electrically insulate the element wire from the inside diameter of the heater sheath. A thicker, "low" thermal conductivity layer backs up the element wire, directing the heat inward towards the part that is being heated. The result is more efficient heat transfer... a performance solution that lowers element wire temperatures and increases heater life. Continue reading →

  • Cast Aluminum Heaters

    Date:2015/9/1

    DT Heaters & Controls fabricates commercial and industrial electric heating and control systems to meet your application requirements. DT produces Cast-In Heaters of aluminum and bronze. We offer precise design and manufacturing to meet our customer鈥檚 mechanical, temperature and reliability requirements. The Cast-In Heaters can be manufactured with one or multiple electrical heating elements with excellent thermal conductivity, to meet your specific design and thermal performance requirements. Our production capabilities range from large quantities of simple platens found in the food or semiconductor industries to complex geometries requiring secondary machining to meet the demands of your precision components. Continue reading →

1 2 3 4 5 6 7 8 9

Copyright By Allrigh2015-2016 Yancheng Xingtai Electric Equipment Co., Ltd.
This site uses FLASH technology, if your browser does not plug-in, please install itself again here
版权所有:盐城市兴泰电器有限公司 Four Wheel Tractor/ China Tractor / Farm Tractor 苏ICP备09051867号-1