Contact Us

Official Web

Hot runner coil heater

Data:2016-2-29

Hot runner coil heater is mainly used for hot runner mold or, as well as other precision heating system. Spring heating ring external using high quality Ni-Cr steel tube, the internal use of high purity magnesium oxide , high temperature resistance wire, and first-class manufacturing technology . The wire is after the annealed, with flexibility can be bent into an arc or circle heating.

Introduction:

 1.Hot runner coil heaters also know as cable heaters can be formed to a variety of shapes as required by its many application. 

2.Frequenty though,coil heaters are configured as samll diameter,high performance nozzle heaters that are fully annealed. 

3.Spring hot runner coil heates are use on injection molding machine nozzles and sprue bushings supplying bushings supplying 360 degree of heat with optional distributed wattage available. 

4.Hot runner coil heaters are also used as cartridge heaters where irregular size bores are found.A straight,round cable heater can snake through a seal in packaging equipment installations.  

Heating section

2.2x4.2mm 3x3mm 3.3x3.3mm 

Minimum ID

8mm

OD 

customized

Voltage

15V~380V

Wattages

50W~2000W

Build-in thermocouple power

With or without J/K thermocouple

Lead wire

500/1000/1200/1500/2000mm

Copyright By Allrigh2015-2016 Yancheng Xingtai Electric Equipment Co., Ltd.
This site uses FLASH technology, if you r browser does not plug-in, please install itself again here
Four Wheel Tractor/ China Tractor / Farm Tractor 苏ICP备09051867号-1