Contact Us

Official Web

Heating Element_Cast In Heater

aluminium Die Casting heating plate

aluminium Die Casting heating plate

Sinton can make kinds of Alumnium die casting heater as client’s requirement. If you can supply us a sample or detail drawing, we can make the alumnium die casting heater exactly as your requirement.

Go BackExplain

Sinton can make kinds of Alumnium die casting heater as client’s requirement. If you can supply us a sample or detail drawing, we can make the alumnium die casting heater exactly as your requirement.

Sinton alumnium die casting heater was made of electric tubular heater, inside is the tubular heating element, casting alumnium to be different shapes.

Better quality mould, better size accuracy. The alumnium die casting heater usually used in injection machine, kinds of oven, Water heater, pipeline heater and other kinds of liquid etc. for heating purpose

We also can add insulation layer on the alumnium heater, to keep the heat energy, in that case , they can save 30% to 40% energy.

Analysis of common problems:

1.  If there’s some melt of alumnium , it must be worked with higher working temperature. Standard alumnium die casting heater working temperature is 10 degree to 500 degree, and the melt temperature is approx 600 degree.

Resolve method: control the max working temperature.  To check the temperature control system is good or not.

2.  After connect the electric ,but there’s no any temperature surface

To check the resistance , whether there’s resistance ohms or not. If no resistance, maybe the resistance wire was cut off already. In that case, it is our fault , we would replace all by free

To check the ceramic insulation, whether there’s some dirty on it.

To check the load surface wattage, whether it is too low.

Type

AREA

Size (mm)

Voltage (V)

Power (W)

Technology

XT-FQTC-Φ250X255

1 area

Φ250X255

3X400

8000

1. The use en

Vironment temperature  -20 degree C to 60 degree

3. Leakage current less than 0.5mA

4. Insulation resistance more than 5M

5. withstand voltage: 1500V

6. wattage tolerance                        +5%-10%

XT-FQTC-Φ200X220

2 area

Φ200X220

230

4100

XT-FQTC-Φ200X175

3 area

Φ200X175

230

2400

XT-FQTC-Φ152/Φ140X310

4 area

Φ152/Φ140X310

230

3600

XT-FQTC-Φ305X295

1 area

Φ305X295

3X400

1000

 XT-FQTC-Φ245X260

2 area

Φ245X260

230

4130

XT-FQTC-Φ245X215

3 area

Φ245X215

230

3540

XT-FQTC-Φ165/Φ185X365

4 area

Φ165/Φ185X365

230

4600

XT-FQTC-Φ217X190

1 area

Φ217X190

230

4000

XT-FQTC-Φ170X380

2 area

Φ170X380

230

5200

XT-FQTC-Φ123X220

3 area

Φ123X220

230

2600

XT-FQTC-Φ375X345

1 area

Φ375X345

3X400

16000

XT-FQTC-Φ295X315

2 area

Φ295X315

230

6350

XT-FQTC-Φ295X255

3 area

Φ295X255

230

4940

XT-FQTC-Φ215/Φ195X430

4 area

Φ215/Φ195X430

230

5930

XT-FQTC-Φ350X360

1 area

Φ350X360

3X400

18000

XT-FQTC-Φ350X120

2 area

Φ350X120

3X400

6500

XT-FQTC-Φ310X350

3 area

Φ310X350

3X400

8600

XT-FQTC-Φ280X300

4 area

Φ280X300

3X400

4600

XT-FQTC-Φ250X290

5 area

Φ250X290

3X400

4200

XT-FQTC-Φ250/Φ210X510

6 area

Φ250/Φ210X510

3X400

8600

XT-FQTC-Φ75X162

Φ75X162

230

1400

XT-FQTC-Φ90X220

Φ90X220

230

1500

XT-FQTC-Φ130X280

Φ130X280

230

2200

XT-FQTC-Φ140X325

Φ140X325

230

4000

XT-FQTC-Φ150X420

Φ150X420

400

5000

XT-FQTC-Φ175X460

Φ175X460

400

7000

XT-FQTC-Φ200X550

Φ200X550

400

12000




Copyright By Allrigh2015-2016 Yancheng Xingtai Electric Equipment Co., Ltd.
This site uses FLASH technology, if you r browser does not plug-in, please install itself again here
Four Wheel Tractor/ China Tractor / Farm Tractor 苏ICP备09051867号-1