- Profile

Ø [mm]: 6.5; 8.0; 10.0; 12.5; 16.0; 20.0 or recording to your design with connection at both ends or single end

- Maximum total length: 6000 mm

- Sheath material: stainless steel,incoloy,copper, iron, carton steel etc.

- Cartridge heater sheath temperature: max. 750 °C

- Maximum sheath surface load: 3 W/cm2 to 30 W/cm2

- Heating conductor material: NiCr 8020 or FeCrAl 255

- High voltage proof (cold in extended condition)

with nominal voltage ≤ 24 V: 500 V-AC

with nominal voltage > 24 V: 1500 V-AC

(not for return via the cartridge heater sheath)

- Insulation resistance (cold): ≥ 5 MΩ at 500 V-DC

- Maximum leakage current (cold): ≤ 0.5 mA at 253 V-AC

- Length tolerance: ± 1.5 %

- Power tolerance (cold): +4 % -8%

- Diameter tolerance: ± 0.02 mm

- Maximum supply voltage: 480 V

- Connection: 300 mm glas silk insulated Ni-leads from inside or fiberglass insulated lead cable, or teflon/PTFE lead cable etc

Sinton Group mainly make kinds of electric heating elements and temperature sensor: For example , cartridge heater,hot runner coil heating element, tubular heater element, ceramic emitter, ceramic plate heating element, aluminium casting heater, mica band heater, ceramic band heating elements, Flexible ceramic heating pad, kapton heater, PI film heating elements, resistance wire, thermocouple, Pt100 etc. Also we make industrial heaters for example air duct heater, pipeline heater, oil circulation heater, drying oven etc. All of our heaters and temperature sensor can be OEM and now we have acquired CE certificate for our heating elements.