Size: D60*23 or they can be made as your requirement
Surface load :Standard 4.5W/cm²
Power and Voltage: AC220V/150W, they also can be made according to your design.
Product features:
1. High-quality copper material has the characteristics of fast heat conduction, fast heat dissipation, high temperature resistance, and the temperature can reach 600 "C without burning.
2. The fully sealed production has special effects on the injection nozzle of the injection molding machine with serious glue leakage.
3. Long service life, which can save the number of replacements and improve work efficiency.
4. sealed band heater element technical parameters: ambient temperature -20^ +60 degrees Celsius, relative humidity less than 80%.
5.The leakage current is less than 0.5MA., the cold insulation resistance is >50MΩ; the grounding resistance is <109.
Product name | Brass Band Heater | Product thickness | 3mm-5mm |
Ambient temperature | -20-60℃ | Voltage | 9V-380V |
Insulation resistance | >50MΩ | Power | 50W-2000W |
Leakage current | <5MA | Size | Accept customization |
Application | Injection molding machines, extruders, etc. | Power deviation | ±10% |
Product installation and use precautions:
1. The contact surface of the location where the electric heating element is installed should be flat and free of unevenness.
2. The electric ring heating element should be placed dry to avoid immersion in water to affect its insulation performance.
3. When installing the band resistance element, first check whether the installation position is consistent with the specifications of the electric heating element, and whether the voltage used is consistent.
4. After installation, check whether the hexapod bolts, wiring seat bolts and wiring bolts are locked, so as to avoid thermal expansion and cold contraction affecting the life of the product.
5. Injection molding machine band heating element should be used under the specified voltage. Considering that the voltage in some areas fluctuates greatly at night, the company recommends using a voltage stabilizer to avoid affecting the efficiency and life of the product.
Sinton Group mainly make kinds of electric heating elements and temperature sensor: For example , cartridge heater,hot runner coil heating element, tubular heater element, ceramic emitter, ceramic plate heating element, aluminium casting heater, mica band heater, ceramic band heating elements, Flexible ceramic heating pad, kapton heater, PI film heating elements, resistance wire, thermocouple, Pt100 etc. Also we make industrial heaters for example air duct heater, pipeline heater, oil circulation heater, drying oven etc. All of our heaters and temperature sensor can be OEM and now we have acquired CE certificate for our heating elements.