There are some standard size of this type of ceramic emitter
Power and voltage:220/230V 500W, also can be made according to your design.
Working Temperature Range:1 - 750 ℃
Product features:
Sinton ceramic emitter are widely used in pre-heating of plastic sheets for vacuum forming & thermoforming, drying paints, lacquer & varnish curing, drying printing inks, drying textiles, activating adhesives, removing surface water from objects or moisture removal from fabric and paper, animal husbandry and rearing.
FFE Full Flat Element | 150W | 250W | 300W | 400W | 500W | 650W | 750W | 1000W |
Mean surface temperature | 262℃ | 354℃ | 400℃ | 464℃ | 486℃ | 589℃ | 634℃ | 722℃ |
Max permissible operating temperature | 750℃ | |||||||
Max power density W/cm²(W/inch²) | 0.9(5.8) | 1.5(9.7) | 1.8(11.6) | 2.4(15.5) | 3.0(19.4) | 3.9(25.2) | 4.5(29) | 6.0(38.8) |
Radiant Watt Density at 100mm(W/cm²) | 0.10 | 0.25 | 0.47 | |||||
Average weight | 182g | |||||||
Dimensions | 245x60x26mm | |||||||
Useful wavelength range | 2 to 10um |
The ceramic IR heaters are highly efficient.
Ceramic infrared heater offers precise targeting and control with minimal peripheral heat.
It is possible to apply heat only where and when it is required.
The energy in an infrared heater is transmitted at the speed of light from the element to the product.
A constant rate of heating is obtained because the source temperature is normally much higher than that of the product even at the end of the heating cycle.
If there's any ceramic flat heating element inquiry, welcome contact with us and we are professional with better services and high quality ceramic flat heating element.
Sinton Group mainly make kinds of electric heating elements and temperature sensor: For example , cartridge heater,hot runner coil heating element, tubular heater element, ceramic emitter, ceramic plate heating element, aluminium casting heater, mica band heater, ceramic band heating elements, Flexible ceramic heating pad, kapton heater, PI film heating elements, resistance wire, thermocouple, Pt100 etc. Also we make industrial heaters for example air duct heater, pipeline heater, oil circulation heater, drying oven etc. All of our heaters and temperature sensor can be OEM and now we have acquired CE certificate for our heating elements.