Size:φ6.2*600mm  Power and Voltage: 230V/1000W, they also can be made according to your design.

Sinton's 6.2mm diameter cartridge heaters are a great solution for reaching elevated temperatures.

Custom cartridge solutions allow Sinton’s customers to achieve their thermal needs even in the most challenging applications.

After adding the SS hose outside of the lead cable, it can protect the cable not to be broken easy during shaking working.

Instructions for use:

1. Before installation, use a multimeter to measure whether the heating element is powered on. If there is no problem in multimeter measurement, then install it. If it is not powered on, please contact us.

2. Heating element need to be wired in the correct way. Because wrong wiring will cause slow heating and burn out the heating pipe. The following two wiring modes are for your reference.

Instructions for using cartridge heater:

1. The effective heating part of the cartridge heater must be kept dry.

2. The electric connector of the cartridge heater should be placed outside the heating chamber of the insulation layer, the working voltage should not exceed 10% of its rated value, and the shell should be effectively grounded.

3. The working environment of electric heating elements, the temperature is not more than 90 degrees, and there is no explosive or corrosive gas.

4. Electric heating elements should be stored in a dry place, and should not be affected with damp.

Inside the cartridge heater is glass fiber insulated nickel wire or glass fiber insulated wire cable, or PTFE/PTFE wire cable, etc, which can be customized according to customer requirements.

If you want to buy cartridge heater, we are experienced and can provide you with better services and products.

Sinton Group mainly make kinds of electric heating elements and temperature sensor: For example , cartridge heater,hot runner coil heating element, tubular heater element, ceramic emitter, ceramic plate heating element, aluminium casting heater, mica band heater, ceramic band heating elements, Flexible ceramic heating pad, kapton heater, PI film heating elements, resistance wire, thermocouple, Pt100 etc. Also we make industrial heaters for example air duct heater, pipeline heater, oil circulation heater, drying oven etc. All of our heaters and temperature sensor can be OEM and now we have acquired CE certificate for our heating elements.