Power and Voltage: they can be made according to your design.
Flange immersion Heaters are Mainly designed to heat liquid.
They are constructed in Stainless Steel, Copper, Incoloy, Titanium pipes with resistant wire and powder Compressed and swaged for better at transfer. They are than welded or brazed to threaded flanges / Blind flanges or nipples for immersion purpose.
These heaters are shock, vibration & corrosion resistant.
Sinton electric flange immersion heater Application
Widely used in industrial water tanks, vapor degreases and hydraulic / crude Oil, air and gas flow, chemical Baths, Boiler Equipments and much more.
Flange size (mm) | Combination | Single specification | A set of specifications | Diameter (mm) | Material | Length (mm) |
φ115 | 2 tubes/group | 220V 0.5KW | 220V 1KW(parallel connection) | 12 | 304 | 250 |
φ115 | 2 tubes/group | 220V 1KW | 220V 2KW(parallel connection) | 12 | 304 | 300 |
φ115 | 3 tubes/group | 220V 1KW | 220V 3KW(parallel connection) | 12 | 304 | 350 |
φ115 | 3 tubes/group | 220V 2KW | 220V 6KW(parallel connection) | 12 | 304 | 400 |
φ115 | 3 tubes/group | 220V 3KW | 220V 9KW(parallel connection) | 12 | 304 | 450 |
φ115 | 3 tubes/group | 220V 4KW | 220V 12KW(parallel connection) | 12 | 304 | 500 |
φ115 | 3 tubes/group | 380V 2KW | 380V 6KW(delta connection) | 12 | 304 | 400 |
φ115 | 3 tubes/group | 380V 3KW | 380V 9KW(delta connection) | 12 | 304 | 450 |
φ115 | 3 tubes/group | 380V 4KW | 380V 12KW(delta connection) | 12 | 304 | 500 |
φ115 | 3 tubes/group | 380V 5KW | 380V 15KW(delta connection) | 12 | 304 | 600 |
φ115 | 3 tubes/group | 380V 6KW | 380V 18KW(delta connection) | 12 | 304 | 700 |
Technology data:
1.HI-POT TEST: 1500V/S min cold condition.
2.Insulation resistance:20M Ω min
3.Leakage current to be 0.75ma max
While energized at rated voltage
4.Power tolerance:+4%,-8%
5.Voltage:12V-440V
6.Diameter range:1mm to 40mm
7.Heating resistance wire:0Cr25Al5,Cr20Ni80 or as custom'es requirement
8.Air tubular heater wattage : ≥ 2w-8w/cm2
Water tubular heater wattage: ≥ 6w-30w/cm2
Dies and fin tubular heater: ≥ 8W-24w/cm2
If there's any flange immersion heaters inquiry, welcome contact with us and we are professional with better services and high quality flange immersion heaters.
Sinton Group mainly make kinds of industrial heaters for example flange immersion heater, air duct heater, pipeline heater, oil circulation heater, drying oven etc. All of our heaters can be OEM and now we have acquired CE certificate for our heaters.