Size: it can be made according to your design,
Die Cast aluminum heater case
1. Submersible heating plate
2. Connect the high-temperature spiral resistance wire
3. Half-circle heating ring
4. Slotted heating ring
5. Heat plate of heat transfer machine
6. Sealing machine heating plate
7. Irregular heating plate
8. Slotted heating disc
9. A heating ring appears in the cylinder.
Technical data sheet :
1. Electric strength: It can pass the voltage 1500V50HZ sinusoidal AC voltage withstand voltage test, when the voltage withstands 1M1N has no breakdown phenomenon.
2. Leakage current: < 0.5MA
3. Insulation resistance:> 2MQ
4. Grounding resistance: <0.10
5. Power deviation value: 5%~-10%
Application:
Widely used in extruder, vulcanizer, hydraulic press, semiconductor manufacturing, injection molding machine, ultrasonic cleaners, medical equipment, cable machinery, petroleum and other equipment.
Sinton brand Blown Film Dies casting heater features:
1. Long service life
2. Good thermal insulation performance
3. Good mechanical properties
4. Corrosion resistance
5. Anti-magnetic field, etc.
6. Heating up fast
7. Heat evenly
8. Acid and alkali resistance, stable work
Aluminum die casting heater are widely used in plastic machinery, mold, cable machinery, alloy die casting machine, pipelines, chemicals industry, rubber, petroleum and other equipment.
Meterial | Aluminium, Iron,Copper |
Working temperature | Al 350deg.C, Ir 800deg.C ,Co 600deg.C |
Power( w/cm2) | 2.5~4.5, 4.5~6.0,3.5~5 |
Shape | Round or Flat |
Color | Siliver, Red,Yellow |
Standard Thickness:20mm, but 30mm 35mm 15mm etc thickness also can be made according to your requirement.
Direction For Use
1. Enclosure grounding
For safety, remember that the shell of the electrical equipment in use should be reliably grounded.
2. Rated voltage
Working voltage shall not exceed 10% of rated value.
3. Long term unused
If the heater is placed for more than 3 months before being used, it should be intermittently energized and dried by itself under permitted conditions to remove moisture.
4. Moisture-proof
The heater should be protected from moisture and corrosion during storage, and stored in a well-ventilated place.
5. Usage temperature
The service temperature of cast aluminum heater shall not exceed 350 degrees Celsius, and the service temperature of cast copper heater shall not exceed 550 degrees Celsius.
6. Controlling temperature
It is recommended to use it with the temperature controller for the first time to prevent it from burning out.
If there's any aluminum die casting heater inquiry, welcome contact with us and we are professional with better services and high quality aluminum die casting heater.
Sinton Group mainly make kinds of electric heating elements and temperature sensor: For example , cartridge heater,hot runner coil heating element, tubular heater element, ceramic emitter, ceramic plate heating element, aluminium casting heater, mica band heater, ceramic band heating elements, Flexible ceramic heating pad, kapton heater, PI film heating elements, resistance wire, thermocouple, Pt100 etc. Also we make industrial heaters for example air duct heater, pipeline heater, oil circulation heater, drying oven etc. All of our heaters and temperature sensor can be OEM and now we have acquired CE certificate for our heating elements.