Power and Voltage: they can be made according to your design. They can be made with fin or without fin.
Strip heaters, or component heaters, provide an easy and efficient way of using surface area for effective heat transfer.
Steel strip heaters are an excellent industrial heating product. Using a temperature controller such as a mechanical thermostat makes them easy to control. Installing a bimetal thermostat on the heated surface is another cost-effective solution.
Mounting holes help mount process heaters securely on almost any surface, with the terminal extending from the sheath for easy electrical connections. Many users also request lead wires that extend from one end that make the installation more flexible as the temperature control panel is easily adaptable to this configuration.
Temperatures reach as high as 500℉ (260℃) and use the high-quality magnesium oxide found in tubular elements that allow effective heat transfer. An inexpensive way of heating surfaces or small areas, strip heaters are an excellent solution to meet any budget.
Strip heaters are composed of a heating element, a protective sleeve or sheath, and mounting hardware. Radiant heater strip heaters can have fins to maximize surface area and heat transfer to the air. Strip heaters can be clamped or bolted onto objects or solid surface contact heating over large areas and are optimal for indoor applications.
Fin strip heaters applications: Ovens, Hot Plates, Clamp-on water heating, Coffee urns, Vacuum pumps, Vulcanizers, Autoclaves, Core baking ovens, Space Heating, Pre-Heaters, Food Warmers, Dies, Mold heating, Valve houses, Pipe lines, Process welding, Platens, Melting, Baking, Tank Heating, Incubators, Air Heating, Ink drying, Crane cabs, Sealing Bars, Load Bank resistors, and Packaging.
Specifications and Tolerances:
Strip dimensions: 1-1/2” x 5/16” OR 1-1/2” x 3/8”
Outer width:1-1/2″ ± .010
Mounting Slot HOLE Size: 5/16” x ½”
Thickness 5/16 ± .005, 3/8 ±.08”
Length tolerance: ± 1/16″ to 20″, ± 1/16″ over 20′
Max sheath temperature up to 1200°F (650°C)z
Temperature Clamp-on surface 850°F (450°C)
Max Voltage: 480 VAC (depending on design parameters)
Max Lead Voltage recommended at 240 VAC
Max Amperage: 22 amps (for lead wire termination 10 amps)
Max screw terminations 10-32 UNF-25 amp
Resistance tolerance: +10% -5%
Wattage tolerance: +5% -10%
Recommended Wattage Max clamped to part in 70°F ambient air (multiply by 75% if insulated)
Wattage Density (nominal) 20 w/in²
Get a quote on a strip heater today. SINTON also manufactures other industrial heating products such as infrared heaters, immersion heaters, pipe heaters, and more.
