SCR denitration system

1000t/d waste incineration power generation transformation project

Huzhou South Taihu Environmental Protection Energy Co., Ltd. has so far built the fourth phase of the project. The construction scale of the fourth phase of the project is 1×750t/d mechanical grate furnace +1×18MW high-speed turbine generator, which will be connected to the grid for power generation in February 2019; it is planned to build the current phase 6# furnace (that is, the fifth phase of the project) on the long-term reserved land of the fourth phase 5# furnace, and rebuild a waste treatment line with a treatment scale of 1000t/d (60% domestic waste, 30% industrial waste, 10% sludge, mechanical grate furnace) with a treatment scale of 1000t/d (60% domestic waste, 30% industrial waste, 10% sludge, mechanical grate furnace).

Rated power: 350 KW；

Quantity: 1 set；

Rated voltage: 380V AC；

Heating medium: air

Required temperature rise: 380℃ (the initial temperature is 20℃ at room temperature, heated by electric heating cycle for 10 hours, heated to 400℃); the rated power is the power in the state of heating to 400℃.

Medium flow rate: 27100m3/h; (working condition flow rate)

Working pressure: ±3.5kPa；

Design pressure: 10 kPa；

Inlet temperature: 20℃；

Outlet temperature: 400℃；

Design temperature resistance: 450℃；

Heating element shell material: Incoloy800 ；

Air inlet size: DN800, φ820x6mm, PN1.0 MPa；

Air outlet size: DN800, φ820x6mm, PN1.0 MPa；

Tube center height: 980mm ；